CAKE DECORATING – HOW TO APPLY EDIBLE CAKE ART
There are many edible cake art images
available for cake decorating, that will make your cakes stand alone in
excellence. You must follow the directions carefully for best result and ease
in application.
Tips
to Apply Edible Cake Art:
·
Make
sure you have clean, dry hands before touching the image. If you are working
with a frozen cake, let it thaw a bit before applying the icing. Edible Image®
cake decorations need a bit of moisture to blend into the icing.
·
If the
cake is dry, spray it with a light mist of water, brush on light syrup, or add
a thin layer of icing before you apply the image so it will stick to the cake.
If your cake is moist, don’t add water or moisture to the cake. Too much water
will cause the colors to run.
·
Once
the image is applied, it cannot be removed or moved. Know exactly where you
plan to place the image. Using care apply the image to your cake, face up. Once
the image has been applied, tap the image down gently with your fingertips.
Start from the center of the image and work toward the edges.
·
If the
image should become moist or hard to remove from the backing, it can be placed
in the freezer for a couple of minutes, the image should peel off easily.
·
If the
image should bubble after it is applied, gently tap and DO NOT RUB the image.
If the cake is still frozen after application, it should be placed in the
refrigerator to thaw slowly. Avoid exposing the image to ultraviolet light. The
image may fade over time, as with any food coloring.
·
If the
image bubbles during freezing, again you can gently tap the image.
Handling
and Storage of the Image
·
Edible
Image® decorations should be stored in the silver bag it came in, and kept in a
cool, dry place.
·
Make
sure to reseal the original bag after you remove an image.
·
You
will need to use the image immediately after it is removed from the bag.
·
Once
you have finished decorating with Edible Image® decorations. You can store
your product as you normally would. The
images are freezer, shelf, and refrigerator friendly.
How
to apply the Images to other products
·
Ice Cream: To apply the
image to a cake frosted with ice cream or non-dairy whipped topping, do not add
any additional water. If you are applying the image directly on ice cream, you
should let the ice cream melt just a bit before application. When you are
working with soft serve ice cream, you will get better results if you apply the
image while the ice cream is soft and then freeze it.
Buttercream
icing
·
Apply
the image immediately after icing the cake. Buttercream will form a crust about
an hour after they have been applied. If this has happened, spray the icing
with a fine mist of water before you apply the image.
Frozen
Cakes
·
Thaw a
bit before icing to avoid cracks forming in the cake, then you can apply the
image. If the decorated cake is frozen, you will need to let it thaw slowly in
the refrigerator, uncovered, so the cake will not sweat and the colors will
stay true.
Royal
Icing
·
Make
sure you add a good mist of water over a cake iced with royal icing before you
apply the image
Non
Dairy Whipped Topping
·
When
working with this medium, do not add any extra water before you apply the
image. Keep the finished cake in the refrigerator to maintain the integrity of
the image and the topping.
Rolled
Fondant or Sugar Paste
·
When
placing an image over sugar paste or fondant, plan where you will put the
image. With a small paintbrush, apply a good amount of plain water. Brush water
only where the image will be. Any water outside the image will leave a mark on
the fondant or sugar paste. Although you must be sure to apply enough water, or
the image will not stick.
·
Edges
can be tapped down with a very small, slightly moist paintbrush.
PouredWhite Chocolate, or other poured icings
·
Apply
the image while the icing is wet. Be sure your cake is on a flat surface or the
image may slide.
Standard
Instruction for Application
·
Remove
the Edible Image® from the sheet just prior to application.
·
If
there are still images in the bag, reseal it immediately.
·
Remove
the image from the backing sheet by gently placing it on a table edge, (facing
up) and rolling the backing sheet over the table edge. This will loosen the
image so that it can be carefully peeled from the backing.
Post a Comment